BMCRS - PACKING NO. 1389
- MSDS: BMCRS
- Manufacturer: PALMETTO INC
- Product Name: PACKING NO. 1389
- National Stock Number: 5330-00N025937
Product Identification
Product ID:PACKING NO. 1389
MSDS Date:01/19/1989
FSC:5330
NIIN:00N025937
MSDS Number: BMCRS
Responsible Party
DENTON, MD 21629
US
Emergency Phone: 301-479-2244
Info Phone: 301-479-2244
Cage: 72902
Contractor
Telephone: 301-479-2244
Cage: 72902
Ingredients
ETHYLENE, TETRAFLUORO-,POLYMER; (POLYTETRAFLUOROETHYLENE)
CAS: 116-14-3
RTECS: KX4025000
ACGIH TLV: 1 MG/M3(DECOMP PROD)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IF OVEREXPOSED TO PTFE FUMES -
POLYMER FUME FEVER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:FLU-LIKE CONDITIONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR & CONSULT PHYSICIAN. INGEST: CALL
MD IMMEDIATELY . EYES: IMMEDIATELY FLUSH WITH POTABLE WATER FOR AT
LEAST 15 MIN. SEE MD . SKIN: FLUSH WITH COPIOUS AMOUNTS OF W ATER.
CALL MD .
Fire Fighting
Flash Point Method:OC
Flash Point:>610F,>321C
Extinguishing Media:WATER, FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:PTEE WILL BURN IN AN ATMOSPHERE OF 100%
OXYGEN WITH SOURCE PRESENT - SOME SMOKE PRODUCED.
Accidental Release
Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN CLEAN, DRY AREA AWAY FROM
FLAME OR EXCESSIVE HEAT.
Other Precautions:ANY USE OF THESE PRODUCTS IN COMBINATION WITH OTHER
PRODUCTS OR ANY OTHER PROCESS IS THE RESPONSIBILITY OF THE USER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:AS REQUIRED BY COMPANY POLICY.
Work Hygienic Practices:AVOID CONTAMINATING TOBACCO WITH PTFE/WASH
HANDS AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Vapor Pres:25
Vapor Density:21
Spec Gravity:1.2
Evaporation Rate & Reference:<1
Appearance and Odor:GREY/BLACK - ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, MOLTEN, ELEMENTAL ALKALI METALS & INTERHALOGEN
COMPOUNDS.
Stability Condition to Avoid:TEMPERATURES ABOVE 752F AND INCINERATION.
Hazardous Decomposition Products:CO*2 ABOVE 600F, HYDROGEN FLUORIDE &
PERFLUORO CARBON OLEFINS ABOVE 827F.
Disposal
Waste Disposal Methods:1. LANDFILL. 2. COMPLETE COMBUSTION & REMOVAL OF
GASEOUS PRODUCTS BY ALKALINE SCRUBBING IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.